Free tool · House planning
Choose your rooms and see a simple sketch of each floor, how much area you need, and what it may cost to build. It is an idea to talk over with your architect, not a building drawing.
Area you need
1,438 sq ft
Your thromde or dzongkhag rules decide how much of the plot you can build on and how far from the boundary. Check with them before you finalise.
What will this cost to build?See how many cement bags, bricks and steel this house needs, how long each stage takes, and the papers for approval.
Open the building guideRoom sizes are common sizes; switch between small, medium and large above. Room shapes follow their area, and doors, windows and stairs show where they usually go. Save a plan and show it to your architect. A licensed architect or engineer must draw the real plan and get it approved.
It depends on how many of each room you pick and whether you choose small, medium or large room sizes. Add your rooms above and this tool adds about 20% for walls, stairs and passages to give you a realistic total, floor by floor.
No. This is a planning sketch to help you think through rooms and area before you talk to a professional. A licensed architect or engineer must draw the actual plan, and your thromde or dzongkhag must approve it before you build.
Each room type (living room, bedroom, kitchen, bath and so on) has a common starting size; Small, Medium and Large scale that size down or up, so you can quickly compare a compact layout against a more spacious one.
Check your plot size against the footprint this tool shows, confirm setback and coverage rules with your thromde or dzongkhag, then take the plan to a licensed architect. You can also jump straight to the cost calculator or the building guide from this page.
Yes, parking and a ground-floor shop are both room types you can add or remove like any other room, and the tool fits them into the floor layout.
Find masons, carpenters and site supervisors on Dragon, or post a job free and let them come to you.
Are you a builder, architect or supplier? Get customer requests